A chef’s knife that has gone dull is more of a faff than a cheap knife that still cuts. That is why knife sharpeners make sense as a Christmas kitchen gift: a pull-through you can use in half a minute, an electric unit that does the same job with a motor, or a whetstone if you are willing to practise a little. They belong with the blades in our kitchen knives buying guide. A honing steel is a different tool. It realigns a rolled edge, and it does not grind a new one.
The nine Amazon UK options below ran from £8.00 to £115.00 when we checked on 18 November 2026. Four were sold by Amazon. The others were third-party offers, some dispatched by Amazon, so check the seller before you pay. Official maker specs are used where they are clearer than the listing copy.
A pull-through is the everyday choice for most European and American kitchen knives, usually at a fixed angle around 20° per side. It is also the tool most often used on the wrong blade. AnySharp says its Classic will take wide-toothed serrated bread knives, but not fine serrations or ceramic blades, and Japanese knives are not a reliable match. ZWILLING’s four-stage model has separate ceramic slots for Japanese and Western knives, plus a shear slot. Do not run a coated non-stick knife through any sharpener unless the knife maker says you can. The coating is easy to ruin, which is one reason a worn pan is often better replaced, as we cover in our non-stick frying pans guide.
If you want a repeatable angle on mixed knives, a guided clamp such as Work Sharp’s Precision Adjust, or a rolling sharpener such as the HORL 2, gives you 15° and 20° options without freehand guessing. A 1000/6000 stone is slower and takes practice, but it is the usual path if you already own thinner Japanese blades and do not want to drag them through a carbide V. Prices move, and colour or bundle stocks change, so confirm the model and the seller on the day.
The Drawer-Sized Sharpener With a Suction Foot
Budget · £8.00 · 20° carbide, PowerGrip · sold by Amazon
AnySharp is a British brand, and the Classic is the smallest, cheapest way into a usable pull-through. Officially it sharpens at a fixed 20° per side through tungsten carbide plates, and the PowerGrip suction base is meant to hold it to a smooth worktop so you are not gripping the body next to the blade. The official size is 63 × 63 × 70 mm and about 80 g, so it really does disappear in a drawer. When we checked on 18 November 2026, the black listing was £8.00 on Amazon UK, sold and dispatched by Amazon, against AnySharp’s own site price of £10.00.
AnySharp’s FAQ is unusually clear about what this will and will not take. Classic, Pro and Evo will sharpen wide-toothed serrated blades such as a bread knife. They will not do fine serrations, which rules out many steak knives, and they are not for ceramic knives at all. On Japanese knives the official line is cautious: maybe, but not always, and only the X-Blade model is described as suitable for those thinner angles. If your everyday knives are standard European or American kitchen steel, the Classic is a sensible first buy. If you own a thin Japanese gyuto, skip the carbide V and look at a stone, the ZWILLING slots, or a guided system further down.
The carbide plates are replaceable on the official site, and the Classic carries a 2-year product warranty there. The Pro is the same 20° geometry in a metal body, with a 10-year official guarantee, if you want a sturdier shell later. For most home drawers, the Classic at this price is enough.
- ✅ Official 20° carbide pull-through with a PowerGrip suction base, compact enough for a drawer
- ✅ Takes wide-toothed serrated bread knives, as AnySharp states, as well as standard kitchen steel
- ✅ Sold by Amazon at £8.00 when we checked, under the official £10 site price
- ❌ Not for ceramic knives, fine serrations, or reliably for thinner Japanese edges
- ❌ A carbide V removes metal quickly, so a few light passes beat a long sawing session
A First Stone That Will Not Empty the Drawer
Budget · £9.85 · 1000/6000 grit, angle guide · sold by Amazon
If you would rather learn to sharpen on a stone than drag every blade through carbide, this Amazon Basics water stone is the cheap way to try it. The listing is a dual-sided 1000/6000 grit stone that uses water, with an angle guide, a silicone pad and a bamboo base. The stated size is 21.3 × 9.1 × 4.6 cm and the kit weighs about 953 g. It was £9.85 when we checked, sold by Amazon, marked down from £11.59.
1000 grit is the working side for a dull kitchen knife. 6000 is the finishing side. That pairing is the usual home combination, and it is the same grit split you will see on much dearer Japanese stones. What you do not get at this price is a famous stone brand, a flattening stone, or a coarse 400 grit face for a chipped edge. The included angle guide helps you keep the blade steady, but it is still a freehand process, and the first session will be slower than a pull-through.
Soak or wet the stone as the listing directs, keep the base on a damp cloth so it does not skate, and do not expect a perfect edge in two minutes. If you decide you like stones, the four-grit kit further down adds a coarse pair and a flattener. If you already know you will not practise, the AnySharp or SHARPAL will get more use.
- ✅ Dual-sided 1000/6000 water stone with an angle guide and a non-slip bamboo base, at £9.85
- ✅ Sold by Amazon, and a low-risk way to try stones before spending on a named Japanese brand
- ✅ Works on kitchen knives and, the listing says, scissors and pocket knives as well
- ❌ No coarse grit and no flattening stone in this box, so a damaged edge or a dished stone is harder work
- ❌ Freehand sharpening is slower than a pull-through and takes a little practice
Carbide, Ceramic and a Slot for the Kitchen Scissors
Best Value · £14.99 · 20° three-stage + scissors · SHARPAL UK, Amazon dispatch
The SHARPAL 191H is a compact three-stage pull-through with a suction base and a dedicated scissors slot, which is the useful extra the AnySharp Classic does not have. Officially it sharpens double-bevel knives at about 20° per side. Stage one is tungsten carbide, for setting a new edge on a dull blade. Stage two is ceramic, for honing, and that ceramic slot is also the one SHARPAL names for serrated knives. The third slot is a carbide scissors sharpener. The official size is 7 × 7 × 6 cm and about 90 g, with a 3-year warranty on the brand site.
When we checked, it was £14.99 on Amazon UK, sold by SHARPAL UK and dispatched by Amazon, so you are on a third-party offer with Amazon packing and delivery. That is a fair mid-budget price for a unit that covers knives and the household scissors in one body. SHARPAL says replacement carbide and ceramic parts are not sold separately; if the abrasives fail under normal non-commercial use inside the warranty, you go through the warranty, not a spare-parts shop.
Use the suction switch on a clean, smooth, dry surface (glass, tile or a polished worktop), and pull from heel to tip with light pressure, as the official instructions describe. The same caveats as any carbide pull-through still apply: this is not the tool for a ceramic knife, and it is a 20° sharpener, so thinner Japanese edges belong in a different product. Professional hairdressing shears are also off the official recommendation list; kitchen scissors are the intended job.
- ✅ Official three-stage layout: carbide, ceramic (including serrated knives) and a scissors slot, at about 20° per side
- ✅ Suction base and a 3-year official warranty, in a 7 cm cube
- ✅ £14.99 when we checked, dispatched by Amazon from SHARPAL UK
- ❌ Third-party seller, so confirm the offer on the day
- ❌ Replacement abrasives are not sold separately, and a 20° V is the wrong tool for many Japanese knives
Four Grits and a Flattener, Still Under £25
Best Value · £21.37 · 400/1000 and 3000/8000, flattening stone · sold by Amazon
The single 1000/6000 stone above is a starter. This Amazon Basics kit is the same idea with more grit range: a dual-sided 400/1000 stone, a dual-sided 3000/8000 stone, a flattening stone, an angle guide and a non-slip bamboo base. It was £21.37 when we checked, sold by Amazon. That is still budget money for a set that can reshape a badly neglected edge on 400 grit, sharpen on 1000, then finish on 3000 and 8000.
The flattening stone matters more than it sounds. Water stones dish in the middle with use, and a dished stone rounds the edge you are trying to straighten. Having a flattener in the box means you can dress the faces occasionally instead of buying a separate lapping plate later. The angle guide is the same kind of training wheel as on the cheaper stone: useful while you learn, easy to outgrow.
You still need time and a method. Soak or wet the stones as directed, work from coarse to fine, and keep the base from sliding. If you only ever sharpen a couple of Western chef’s knives and you want the job done in a minute, a pull-through will get more use. If you already own thinner Japanese knives, or you want to avoid carbide, this kit is the better spend than the single stone, and it is still sold by Amazon.
- ✅ Two dual-sided stones covering 400/1000 and 3000/8000, plus a flattening stone, angle guide and bamboo base
- ✅ Sold by Amazon at £21.37 when we checked, enough grit range for a dull or slightly damaged edge
- ✅ The flattener lets you dress the stones as they wear, which the single-stone kit does not include
- ❌ Still a freehand system, so it is slower than a pull-through or a guided clamp
- ❌ Not a named Japanese stone brand, and results depend on your technique
Sixty Watts and a Retractable Cord
Best Value · £26.99 · 60W, two wheels, scissors slot · VonHaus UK, Amazon dispatch
If you want a motor to do the pulling, the Vonshef is the cheapest electric in this line-up. The Amazon listing is a 60W unit with two grinding wheels, a scissors slot, a screwdriver groove, non-slip feet and an auto-retractable cord. It was £26.99 when we checked, sold by VonHaus UK and dispatched by Amazon. VonShef and VonHaus sit under the same UK kitchen-gadgets umbrella, so this is a brand listing rather than a random unbranded import, but it is still a third-party offer.
The two wheels are there to sharpen and then hone, which is the usual budget-electric layout. The listing says it will take kitchen and sporting knives in alloy, carbon or stainless steel. It does not give a selectable 15°/20° angle, and it does not claim a diamond-coated or ceramic polishing stage the way the dearer Salter and Chef’s Choice machines do. Treat it as a convenient everyday sharpener for ordinary Western kitchen knives, not as a precision tool for mixed Japanese and European collections.
Electric sharpeners remove metal faster than a manual pull-through, so short passes and the maker’s guidance matter. Keep coated non-stick knives out of it unless the knife maker says otherwise, and do not assume every serrated blade is welcome. The retractable cord is a small, genuine plus on a crowded UK worktop, because the thing can go back in a cupboard without a cable battle.
- ✅ 60W two-wheel electric with a scissors slot, screwdriver groove and a retractable cord, at £26.99
- ✅ Dispatched by Amazon from VonHaus UK, so delivery is the familiar Amazon route
- ✅ A simple motorised option if you will not use a stone and want less effort than a pull-through
- ❌ Third-party seller, and no published 15°/20° angle choice on the listing
- ❌ A motor takes metal off quickly, so it is easy to overdo a thin or expensive blade
Japanese and Western Slots, Plus the Shears
Best Value · £36.13 · four knife stages + shear slot · sold by Amazon
ZWILLING’s four-stage pull-through is the one to pick if your block is a mix of Western and Japanese knives and you still want a no-skill gadget. Officially (item 1010831) it is a five-slot body: coarse and fine ceramic for Western knives, coarse and fine ceramic for Japanese knives, and a fifth slot shaped for scissors. The Amazon title calls it a 4-stage sharpener with a shear sharpener, which is the same layout under a shorter name. When we checked, it was £36.13, sold by Amazon, and in stock.
That labelled split is the point. A single 20° carbide V will happily recut a thinner Japanese edge to a Western angle if you keep using it. Here you put the knife in the slot that matches the style, coarse then fine, and the ceramic stages hone as well as sharpen. The official page also lists a contoured handle, a rubberised non-slip base, left- or right-handed use, and a lifetime warranty from ZWILLING. It is made of plastic, weighs about 0.20 kg (0.44 lb) on the official spec, and originates in China, which is normal for this class of tool.
It costs more than the AnySharp or SHARPAL because you are paying for the extra slots and the knife-brand name, not for a motor or a stone. If every knife you own is a standard Western chef’s knife or a bread knife, you may not need the Japanese pair. If you have both, this is the pull-through that actually acknowledges the difference, and it was an Amazon-sold offer when we looked.
- ✅ Separate coarse and fine ceramic slots for Japanese and Western knives, plus a scissors slot
- ✅ Sold by Amazon at £36.13 when we checked, with an official lifetime warranty from ZWILLING
- ✅ Non-slip base and a safety grip, compact enough for a drawer
- ❌ Dearer than simpler 20° carbide pull-throughs if you only own Western knives
- ❌ Plastic body, and it still will not help a coated non-stick blade unless the knife maker allows it
Pick the Angle, Then Repeat It
Best Value · £60.64 · 15 to 30° in 1° steps · Military-eu, third-party
Work Sharp’s Precision Adjust is a clamp-and-rod system, not a pull-through. You fix the knife in the clamp, set the angle, and stroke a three-sided abrasive rod along the edge. Officially the angle dial runs from 15° to 30° in 1° steps, and the rotating rod carries 320 grit diamond, 600 grit diamond and a fine ceramic face. The clamp is rated for blades up to 0.1875 in thick. The tool is listed at 1.8 lb with a 3-year official warranty. When we checked, it was £60.64 on Amazon UK, sold and dispatched by Military-eu, so this is a third-party offer, not Amazon retail.
The appeal is repeatability. A bench stone will only hold the angle if your hands do. Once you write down 15° for a thinner Japanese knife or 20° for a Western chef’s knife, the frame keeps that number on every pass. There is no water or oil on the three faces, and you turn the rod rather than swapping stones. It is slower than a pull-through, and it takes a little bench space, but it is the option in this list that can serve a mixed knife drawer without forcing every blade through the same V.
It will not do kitchen scissors, and it is not a pocket gadget. If you only want to freshen two everyday knives once a month, the ZWILLING or SHARPAL is less faff. If you have already been frustrated by freehand stones, or you own both 15° and 20° knives, this is the system that makes the angle a setting rather than a guess. Check the seller and the dispatch estimate, because Military-eu was the live offer when we looked, not Amazon.
- ✅ Official 15 to 30° adjustment in 1° steps, with 320 and 600 grit diamond plus a ceramic face on one rod
- ✅ A clamp-and-frame setup that repeats the same angle, useful for mixed Japanese and Western knives
- ✅ 3-year official warranty, and no water or oil needed on the abrasives
- ❌ Third-party Amazon listing via Military-eu, so check seller and dispatch
- ❌ Needs bench space and a bit more time than a pull-through, and it does not sharpen scissors
The Belt Machine That Also Does the Garden Tools
Premium · £101.84 · electric belts, 20° and 25° · Military-eu, third-party
The Work Sharp Knife & Tool Sharpener Mk.2 is the powered option if you want more than kitchen knives. Officially it is a benchtop belt sharpener with fixed 20° and 25° knife guides, a tool cassette with a 65° scissor guide, and a two-speed motor. The belts are ½ × 12 in, and the box includes two of each: P80 coarse, P220 medium and 6000 fine. Official weight is 3.0 lb, with a 3-year warranty. Work Sharp lists kitchen knives, pocket knives, serrations, scissors, axes and garden tools among the jobs. When we checked, the WSKTS2-E listing was £101.84 on Amazon UK, again sold and dispatched by Military-eu.
That range is why it costs more than the Vonshef. You are buying a small belt grinder with angle guides, not just a two-wheel kitchen gadget. The low speed is there for control on knives; the higher speed is for heavier tool work, as the official copy describes it. Flexible belts follow a curve better than a rigid wheel, which is useful on a recurve, a garden blade or a serration, provided you follow the guides and the included belt sequence.
It is also the noisiest, bulkiest sharpener in this guide, and a motor plus a coarse belt can wreck a thin blade if you linger. This is a workshop-and-kitchen tool, not a drawer gadget. If you only cook, the HORL 2 or the Precision Adjust is a calmer spend. If you already sharpen chisels, secateurs or a pocket knife as well as the chef’s knife, the Mk.2 is the one machine that officially covers that mix. Confirm the Military-eu offer and what is in the box before you buy.
- ✅ Official 20° and 25° knife guides, a 65° scissor guide, and P80, P220 and 6000 belts in the box
- ✅ Two-speed motor, and official support for knives, serrations, scissors and garden tools
- ✅ 3-year official warranty, at £101.84 when we checked
- ❌ Third-party listing via Military-eu, not sold by Amazon
- ❌ Bulkier and more aggressive than a kitchen-only sharpener, so it needs care on thin blades
A Walnut Roller With 15 and 20 Degrees
Premium · £115.00 · 15° and 20°, diamond + ceramic · Horl 1993, Amazon dispatch
The HORL 2 is the Christmas-present end of this list: a solid walnut rolling sharpener, made in Germany’s Black Forest, with a magnetic angle support that gives you 15° on one face and 20° on the other. The roller itself has a diamond disc for the first grind and a ceramic honing disc to take the burr off afterwards. Official UK price on HORL’s site was £115.00, and the Amazon UK listing matched that figure when we checked. It was sold by Horl 1993, the official brand shop, and dispatched by Amazon, so the third-party label here is the maker, not a random reseller.
You place the knife on the magnetic guide, pick the 15° or 20° face, and roll the sharpener along the edge. There is no water, no clamp to set, and no motor. HORL says the diamond disc will grind steels of any hardness, and the ceramic disc has grooves to clear swarf. Interchangeable discs are part of the system if you later want a different grit, which is a genuine advantage over a sealed pull-through, at a price.
What you are paying for is the guided angle, the materials and the fact that it lives happily on a worktop rather than in a toolbox. It will not sharpen scissors, and it is slower than an electric if the knife is very dull, because you still have to do both sides by hand. If £8 of AnySharp already keeps your everyday blades usable, this is a luxury, not a necessity. If you want a 15° and 20° option that does not look like workshop kit, and you are happy to pay gift-level money, the HORL 2 is the premium pick in this group.
- ✅ Official 15° and 20° magnetic guide, with a diamond grinding disc and a ceramic honing disc, in solid walnut
- ✅ Made in Germany, and the Amazon offer was from Horl 1993 with Amazon dispatch, at the official £115.00
- ✅ No water and no motor, and the discs can be swapped for other HORL abrasives later
- ❌ A lot of money next to a pull-through that will already refresh a Western chef’s knife
- ❌ No scissors slot, and a very dull knife will take more passes than an electric belt or wheel
| Product | Type | Price | |
|---|---|---|---|
| AnySharp Classic Knife Sharpener | Pull-through | £8.00 | View |
| Amazon Basics Whetstone Knife Sharpener Dual-Sided 1000/6000 Grit | Whetstone | £9.85 | View |
| SHARPAL 191H Kitchen Chef Knife and Scissors Sharpener | Pull-through | £14.99 | View |
| Amazon Basics Whetstone Knife Sharpener Kit 400/1000 & 3000/8000 Grit | Whetstone kit | £21.37 | View |
| Vonshef Electric Knife Sharpener | Electric | £26.99 | View |
| ZWILLING Razor-Sharp 4-Stage Pull Through Knife Sharpener with Shear Sharpener | Pull-through | £36.13 | View |
| Work Sharp Precision Adjust Knife Sharpener | Guided manual | £60.64 | View |
| Work Sharp Knife and Tool Sharpener Mk.2 | Electric | £101.84 | View |
| HORL 2 Walnut Rolling Knife Sharpener | Rolling | £115.00 | View |
Related guides
- Kitchen knives: one good chef’s knife or a block set if you are buying the blade first, then a sharpener to keep it useful.
- Non-stick frying pans, and when to spend more for why coated knives and pans are a poor match for a sharpener.
- Cast iron skillets and griddle pans if the same kitchen spend is going on pans that are happier with a good knife than with a gadget.
- Digital kitchen scales for Christmas baking for another small worktop tool that actually gets used in the same drawer run.
FAQs
Pull-through, electric or whetstone: which knife sharpener should I buy?
Buy a pull-through if you want a fixed-angle gadget for everyday Western kitchen knives and you will actually use it. The AnySharp Classic at £8.00, the SHARPAL 191H at £14.99 and the ZWILLING four-stage at £36.13 cover that job, with the ZWILLING adding separate Japanese slots and a shear slot. Buy an electric if you want the motor to do the work: the Vonshef at £26.99 is the cheap everyday option, and the Work Sharp Mk.2 at £101.84 is the one that also officially covers tools and scissors with belts and guides. Buy a whetstone or a guided system if you own thinner Japanese knives or you want to set 15° and 20° yourself. The Amazon Basics 1000/6000 stone starts at £9.85, the four-grit kit is £21.37, the Precision Adjust is £60.64, and the HORL 2 is £115.00.
Can I put serrated or Japanese knives through a pull-through?
Only as the maker describes. AnySharp says its Classic, Pro and Evo will take wide-toothed serrated bread knives, but not fine serrations, and they are not for ceramic knives. Japanese knives are a maybe, and AnySharp points to its X-Blade, not the Classic, for those thinner angles. SHARPAL names the ceramic slot, not the carbide slot, for serrated knives, and the 191H is a 20° per side tool. ZWILLING’s four-stage model has separate Japanese and Western ceramic slots. If the official wording does not mention your blade type, do not invent a method. A guided 15° system or a stone is the safer route for a thin Japanese edge.
What is the difference between a honing steel and a knife sharpener?
A honing steel (or ceramic rod) straightens an edge that has rolled over in use. It does not remove much metal and will not rescue a genuinely blunt knife. A sharpener, whether that is a pull-through, an electric wheel or belt, a whetstone or a rolling diamond disc, grinds a new bevel. If the knife was sharp last month and has just started to feel tired, a few strokes on a steel may be enough. If it slides off a tomato, you need to sharpen. The two jobs sit together in a useful drawer, and they are not interchangeable.
Should I sharpen coated non-stick knives?
Not unless the knife maker says you can. A pull-through, a stone or an electric wheel will cut through a non-stick coating as readily as it cuts steel, and once the coating is scratched the blade often sticks and rusts. Leave coated knives alone, or replace them when they are worn. The same logic applies to cheap non-stick pans, which is why our non-stick frying pans guide treats a ruined coating as a replacement job, not a sharpening job.
What angle should I sharpen kitchen knives at?
Follow the knife or sharpener maker, not a guess. Many European and American kitchen knives are sharpened at about 20° per side, which is why AnySharp and SHARPAL fix that angle, and why the HORL 2 and Work Sharp Precision Adjust both offer 20°. Many Japanese knives use a thinner 15° angle, which is why the HORL 2 has a 15° face, the Precision Adjust starts at 15°, and ZWILLING provides separate Japanese slots. If you do not know the original angle, start with the maker’s guidance for that knife brand, and do not recut a thin Japanese edge with a 20° carbide V just because it is handy.
Final Thoughts 💡
If you just want the everyday Western knives to cut again, start with the AnySharp Classic at £8.00, sold by Amazon. The SHARPAL 191H at £14.99 is the step up if you also want a scissors slot and a ceramic stage, accepting a SHARPAL UK offer with Amazon dispatch. The ZWILLING four-stage at £36.13, also sold by Amazon, is the pull-through to buy if you have Japanese and Western knives in the same block.
For stones, the Amazon Basics 1000/6000 at £9.85 is the cheap trial, and the four-grit kit at £21.37 is the better spend if you already know you will practise. The Vonshef electric at £26.99 is the low-cost motorised option, dispatched by Amazon from VonHaus UK. If you want a settable angle, the Work Sharp Precision Adjust at £60.64 is the clamp system, and the Mk.2 at £101.84 is the belt machine that also does tools; both were Military-eu offers when we checked. The HORL 2 at £115.00, from Horl 1993 with Amazon dispatch, is the walnut 15°/20° roller if you are buying a gift rather than the cheapest way to a sharp knife.
For more UK buying guides like this, visit https://hotuk.deals/.
Hotuk.deals is a participant in the Amazon EU Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk. As an Amazon Associate, we earn from qualifying purchases.


